|
PCS-601
1:1, 100% solids, aliphatic polyaspartic, applied by squeege, trowel, or phenolic core roller.
 This aliphatic material is designed as a protective decorative, yet durable coating for garage floors and many other substrates that require epoxy type finishes. PCS-601 is a thick roll-on coating that was designed to coat overhead fixtures or vertical applications. Under normal conditions light foot traffic is permitted within 2-5 hours after application and return to service in 24 hours. PCS-601 can be applied in low temperatures and high humidity. PCS-601 exhibits excellent abrasion, impact, and chemical resistance. This material also features excellent UV stability and high gloss retention. PCS-601 excels in every category versus epoxies. Choosing a variety of colors, vinyl chips, quartz, and pigments allows PCS-601 to achieve almost any finish a customer requires.
   
PCS-602 - 1:1, 72% solids by volume, aliphatic polyaspartic, applied by squeege, trowel, or phenolic core roller.
 PCS-602 is also designed as a decorative coating for flat surfaces such as garage and warehouse floors, car showrooms, decks, resturant floors, loading docks and many other surfaces. Being 72% solids allows the product to flow and spread out further then the PCS-601 product line. PCS-602 exhibits excellent abrasion, impact and chemical resistance. This polymer coating also features excellent UV stability and high gloss retention. PCS-602 excels in every category versus epoxies. Choosing a variety of colors, vinyl chips, quartz, and pigments allows PCS-602 to achieve any finish a customer requires.
|
